AERIAL BUNCHED CABLES
Multicore upto 300 sq.mm. upto and including 6.6 kV
Specification: IS: 14255:1995, IS: 7098-II, IEC: 60502-I & II, BS: 5467, BS: 6724, BS: 6622
Aerial Bunched Cable (ABC) is a very innovative concept for overhead power distribution as compared to the conventional bare conductor overhead distribution system. It is being designed, manufactured & tested conforming to IS: 14255 & other international specifications. It provides higher level of safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost. ABC is also considered to be ideal for power distribution in congested urban areas with narrow lanes and by-lanes. In developing urban complex, ABC is the first choice because of its flexibility for re-routing as demanded by changes in urban development plan.
ACSR Conductors
61 Strands upto 560 sq.mm.
Specification: IS: 398-II, BS: 215, ASTM: B232, CSA: C49-I, DIN: 48204, NFC: 34120
This conductor consists of a solid or stranded steel core surrounded by strands of aluminium (E.C. GRADE). ACSR CONDUCTOR is available in a wide range of steel varying from as low as 6% to as high as 40 %. The higher strength ACSR Conductors are used for river crossings, overhead ground wires, installations involving extra long spans etc.. against any given resistance of conductor, ACSR conductor may be manufactured for having a wide range of tensile strength as per requirement. The principal advantage of these conductors are high tensile strength and light weight with longer spans as well as with lesser supports.
AAA Conductors
61 Strands upto 560 sq.mm.
Specification: IS: 398-IV, BS: 3242, ASTM: B399, CSA: C49, DIN: 48201, NFC: 34125
This conductor is made from aluminium-magnesium-silicon alloy of high electrical conductivity containing enough magnesium silicide to give it better mechanical properties after treatment. These conductors are generally made out of aluminium alloy 6201. AAAC Conductors has a better corrosion resistance and better strength to weight ratio and improved electrical conductivity than ACSR on equal diameter basis.
AA Conductors
61 Strands upto 560 sq.mm.
Specification: IS: 398-I, BS: 215, ASTM: B232, CSA: C49-I, DIN: 48204, NFC: 34120
This conductor is also known as aluminium stranded conductor. This conductor is manufactured from electrolytically refined (E.C.GRADE) aluminium, having purity of minimum 99.5% of aluminium. This conductor is used mainly in urban areas and the spacing is short and the supports are close. All aluminium conductors are made up of one or more strands of aluminium wire depending on the end usage. These conductors are also used extensively in costal because it has a very high degree of corrosion resistance.